TECHNICAL SPECIFICATIONS
SolarRO SW 120
Seawater Reverse Osmosis System
Product water flow rate
5 m³/h
Clean water recovery rate
33 %
Energy consumption
15 kWh
Energy per m³ of clean water
2,1 kWh/m³
Make Clean Water with Solar. Cut Costs. Build Resilience.
- Fast to Deploy. Easy to Operate.
- Flexible Power Options.
- Built to Last.
Technical Specifications
| Product water flow rate* | 5 m3/h (1320 gal/h) |
| Product water quality* | TDS < 140mg/L, ph 6.5 |
| Raw water feed flow rate | 15,2 m3/h (4015 gal/h) |
| Recovery rate* | 33 % |
| Minimum salt rejection | 99,5 % |
| Brine flow rate* | 10,2 m3/h (2695 gal/h) |
| Brine quality* | TDS 53700 mg/L |
| System pressure | 50 bar |
| High-pressure pump | APP 6.5, Super Dublex, Danfoss |
| HPP motor | 11 kW, Bevi |
| Energy recovery | 50 % |
| Energy recovery device (ERD) | 4 kW, iSave 21 Plus |
| Raw water feed pump** | 3 kW, bronze/AISI 316L |
| Pressure vessels | 2 x 8080 |
| RO Membranes | 4 x 8040 SW30HRLE 440i or equivalent |
| Cartridge pre-filtration** | High-flow filtration, 25, 3 micron |
| Variable frequency drive (VFD) | Vacon 100X, 15 kW solar application, Danfoss |
| Specific energy*** | 2,5 kWh/m3 |
| Recommended minimum of PV panels*** | 60 x 360 Wp |
| DC power supply requirement (solar PV) | 600 – 800 VDC |
| AC power supply requirement (grid) | 380 – 480 VAC / 50 – 60 Hz |
* Test Conditions: Seawater TDS 36 000 mg/l, pH 8, T 25°C, system pressure 50 bar ** Raw water pump model and characteristics subject to change depending on site-specific requirements *** Raw water feed pump not included Specifications and system design are subject to change without prior notice. |
Operating Conditions
| Raw water source | Seawater / high saline groundwater |
| Raw water TDS range | 20000 – 40000 mg/L |
| Raw water temperature range | 5 – 45 °C |
| Air temperature range | 0 – 45 °C |
| Raw water feed pressure range | 2 – 5 bar |
Standard features
- Patented ANVS® pressure control
- Containerized system (20ft)
- Energy Recovery Device (ERD)
- Integrated CIP (clean in place) system
- Dry run and over-pressure protection
- Product water quality indicator (TDS)
- Non-corrosive materials: Super Duplex, PVC-U
Customizable features
- DrivePro® Remote Monitoring
- Multi-Media filtration / specific substance removal filtration
- Specific substance removal filtration
- Antiscalant dosing
- UV-disinfection / Post-mineralization
- Containerized system (20ft)
- Integrated clean water dispensing system
DECENTRALIZED DESALINATION
4 Reasons to Choose
Solar Water Solutions
Built for harsh conditions – energy-efficient and reliable anywhere.
Expert service and smooth delivery from start to finish.
Clean water made simple and sustainable – wherever you are.
Lower costs, less waste, and a better future.